500W High Pole Light-Cu Pipe +Massive Fins AL
100W LED WareHouse Linear Light
100W Rotatable LED Tunnel Light
1000W LED High Mast Light for Stadium Light
100W Massive Fins Aluminum LED Flood Light
30W Ultra Thin LED Flood Light
50W Integrated Solar LED Street Light
100W Integrated LED Source Die-Casting Aluminum street ligh
90W/ 120W Modular Design LED Street Light
5 Years Warranty 120W Street Light
Ways to install LED lights
Installation of LED lights in a computer: Now let us see how LED lights are installed in a computer and the components needed for it. This is one of the ways to install LED lights. Drill a hole of 5mm or more with respect to the LED. After drilling the hole, insert the LED in it and fix it properly. Connect the power with wires to the voltage source and put everything back together. Thinner wires would be better. To make this connection, just an LED, wires, glue or tape and little patience is needed. This will be brighter during night times.
Installation of LED lights in motor cycles: LED gives greater look when placed in motor cycles. This is another way to install LED lights. There are two methods possible in motor cycles. The lights can be switched on as and when needed or the light can be produced when the vehicle is started. That is, a switch can be used to turn on the lights producing wire from the LED to the battery. In this method the lights can be turned on even when the bike is off. The other way is to give positive and ground connection present in the motor cycle. This will switch on the lights when the vehicle is started. The LEDs can be placed wherever needed in the motor cycle.
Installation of LEDs at home: We can also use LEDs in TVs present at home. It is very simple of course. You just need a 12V LED and AC-DC adaptor. AC-DC adaptors are used to power the LEDs. Just cut the end connector off and splice the wires. Now connect these wires to the LEDs you have used. The work is over. The LEDs will glow brightly whenever the television is switched on. If not AC-DC adapter, even LED power supply 12V can be used. Only with the help of LEDs, we are able to see images in television. Similarly the LEDs can be used in kitchens to bring stunning effect. The above installation process can be followed in kitchens or in any other rooms needed. LEDs are known as Light Emitting Diodes. LEDs are found in all kinds of devices. They are used for different purposes in many devices. LED lights are available in different colors. LEDs voltage requirement varies according to the color of the LED. Generally, LEDs need DC current. LEDs do not have a filament like other bulbs and so there is no chance for the LED to burn. LEDs do not get heated at the most. LEDs are very simple and small. Generally, LEDs are of 5mm to 8mm in size. LEDs can be easily fit into any type of electrical circuits because of its tiny size. LEDs can last for long time. In most of the digital devices, LEDs are used to form numbers or digits. LEDs do not consume much current. There are a lot of ways to install LED lights and we‘ll see about them in detail in this article.